| Super
52
|
A
general purpose rule with a through hardened body. Available
with a drawn edge finish. Hardness 40 - 43Rc.
|
Paperboard,
Corrugated, Good for medium runs.
|
Super
60
Super 63
|
This
rule has the same characteristics as Super 52. with a harder
body giving a longer life and superior strength. Available
with a fine ground edge or drawn edge finish. Hardness
47 - 50Rc.
|
Paperboard,
Corrugated, Labels, Plastics. Good for medium to long runs. |
| Super
80
|
(Extra
Hard) A very hard rule with excellent stability for heavy
duty applications. Only available with a fine ground edge
finish. Hardness 53 - 56Rc .
|
Gaskets,
Cork, Felt, Plastics & Foils,
Excellent for long run work. |
NX3
Drawn
NX3
|
Ground
This general purpose rule offers excellent bendability
as a result of the special decarburization process applied
to the body. Available with a fine ground edge or drawn
edge finish. Hardness 42Rc.
|
Paperboard,
Corrugated, Labels, Plastics,
Business Cards, Medium to long run work. |
| Flextron
|
This
rule has a soft body with hardened cutting tip, giving
an extremely ductile rule for intricate bending and long
life on press. Body hardness 20Rc, tip 30Rc.
|
General
Paperboard, Short Run work only. |
| Nova
360 |
A
general purpose rule which offers excellent bendability
available only with a drawn edge finish. For short & medium run work only. Body hardness 36Rc.
|
General
Paperboard, Short Run work only. |
| Novaflex |
This
rule has been designed with a unique blended profile between
the tip and body of the rule, allowing a smoother therefore
cleaner penetration of material. Available with a 54 or
42 degree cutting bevel. Tips are induction hardened and
body is decarburized for excellent bendability. Body hardness
35 - 36Rc, tip hardness 55 - 57Rc.
|
Paperboard,
Corrugated, Labels, Folding cartons, Medium to long run
work. |
| Hard
Edge |
Special
steel with consistent bending properties for use on automatic
machines. The cutting edge tip has a high hardness that
resists wear and stays sharp for long die cutting performance.
Body hardness 35Rc, tip hardness 56Rc.
|
General
Paperboard, Short run work only. |
| Mirror
Edge |
These
cutting rules have sharp and smooth cutting edges for cleaner,
more accurate die cut parts. Require less press pressure
than other rules. Micro polished bevel for quality die
cutting. Fine ground edge finish. Hardness 39-41Rc.
|
To
cut synthetic materials, coated paper board, corrugated
board, labels, card stock, recycled board and plastics. |
Shaved
Edge
(NX-70) |
This
material has uniform hard body for reduced flexing and
will take very tight bends, 2pt, .016 x 165 degree and
3pt .016 x 100 degree. A general purpose rule used for
a large variety of diecutting materials.
|
To
cut paperboard, corrugated board, labels, business cards,
gaskets, and felt. |
| 702,702A,
703 & Sure Bend |
Ground
edge rule products have a sharper cutting edge. These rules
cut clean and accurate requiring less pressure. They give
a better penetration on most heavy-duty materials.
|
To
cut paperboard, felt, cork, gaskets,
and plastics. |
| SuperCut |
A
general purpose high rule with a through hardened body.
Height range 1.61" - 3.937". Available with a ground edge finish. Hardness 39 - 43Rc.
|
Paperboard,
Corrugated, Plastics, Good for Medium runs. |
| SuperEdge |
A
general purpose high rule with a through hardened body.
Height range 1.125" - 1.574". Available with a ground edge finish. Hardness 39 - 43Rc.
|
Paperboard,
Corrugated, Plastics, Good for Medium runs. |
| SuperCreez |
A
general purpose crease rule with a through hardened body.
Precision drawn edge radius finish. Hardness 40 - 45Rc. |
Paperboard,
Corrugated, all normal commercial work. Good for short
to medium runs. |
| SuperFold |
A
general purpose crease rule with a through hardened body.
Precision drawn edge radius finish. Recommended for use
on all types of rule processors. Hardness 34 - 36Rc. |
Paperboard,
Corrugated, all normal commercial work. Good for short
to medium runs. |
| Edge
Wave Zipper |
Our
Edge Wave Rule combines a waved cutting edge with a straight
body. Zipper rule manufactured to rigidly maintained tooth
and gap. Available in 6, 8, 10 & 12mm pitch sizes. |
Paperboard,
Corrugated, all normal commercial work.
|
| Cut
Crease & Perforating Rule |
Both
Cut Crease & Perforating rules are manufactured to the highest of specifications using precision
equipment & techniques. Available in a wide range of cut and tie combinations.
|
Paperboard,
Corrugated, all normal commercial work. |
