PSA Adhesives

The adhesive matrix is provided as an initial guide in selecting adhesives for use with Gaska Tape PSA foam. Unless you have tested or have had in-use experience, we recommend speaking with your Gaska Tape Representative before placing an order.

Designations such as A1, A2, A3 indicate increasing adhesive dry film weights and peel values. Adhesive surfaces and substrates should be kept clean, dry and free from contamination. Due to the wide variety and nature of substrate materials (plastic composites, fillers, coating, etc.), we recommend actual testing of the adhesives prior to purchase.

Adhesive Matrix Gaska PSA Offered on single or double face tape
Emulsion PSAs (Pressure Sensitive Adhesives)					Solvent PSAs
Substrate/Environment	A	C	G	L	P	S
ABS	Suggested			Suggested	Suggested
Acrylic	Suggested			Suggested	Suggested
Aluminum	Suggested			Suggested	Suggested
Glass	Suggested			Suggested	Suggested
Painted Metal	Suggested				Suggested	Suggested
Polyolefin				Suggested	Suggested
Polyester	Suggested			Suggested	Suggested	Suggested
PVC						Suggested
Stainless Steel	Suggested			Suggested	Suggested
TPR (Rubber)				Suggested	Suggested
Creep Resistance		Suggested			Suggested	Suggested
Low Temp. Applications			Suggested
Oily Surface			Suggested
Outdoor Exposure						Suggested
High Temp. Applications		Suggested				Suggested